Willkommen bei Drum Charter
Diese Anleitung begleitet dich vom ersten Beat bis zur Bühne. Du musst sie nicht von vorne bis hinten lesen — spring über die Seitenleiste direkt zu dem Thema, das dich gerade interessiert. Wenn du noch nie ein Chart geschrieben hast, beginne mit dem Schnellstart. Wenn du etwas Bestimmtes nachschlagen willst, nutze die Symbol-Referenz oder die Shortcut-Tabelle.
Drum Charter ist eine textbasierte Schlagzeug-Notations-App. Statt Noten mit der Maus auf ein Notensystem zu ziehen, tippst du einfache Zeichen — x für Hi-Hat, o für Snare, Q für Kick. Das klingt zunachst ungewohnt, ist aber in der Praxis blitzschnell: Ein kompletter Groove ist in Sekunden geschrieben, sofort hörbar und auf allen deinen Apple-Geräten synchron.
Was du hier findest
- Schnellstart in 2 Minuten
- Das Raster verstehen
- Aufbau eines Taktes
- Die Symbol-Palette
- Symbol-Referenz
- Akzente & Dynamik
- Triolen
- Wiederholungen
- Metadaten-Direktiven
- Komplette Beispiele
- Wiedergabe
- Practice Mode
- MIDI E-Drums
- Concert Mode
- Lyrics Mode
- Exportieren
- Einstellungen
- Tastatur-Shortcuts
- Praxis-Workflows
- Fehlerbehebung
- Glossar
- Kontakt & Support
Schnellstart: Dein erstes Chart in 2 Minuten
In vier Schritten hast du deinen ersten Beat geschrieben, angehört und gespeichert. Keine Vorkenntnisse notig.
- Neues Dokument erstellen. Öffne Drum Charter und lege ein neues Dokument an. Auf Mac und iPad: Cmd+N. Auf dem iPhone: tippe auf das +-Symbol. Drum Charter ist eine dokumentbasierte App — jedes Chart ist eine Datei, die du in iCloud Drive, „Auf meinem iPhone“ oder jedem anderen Ablageort speichern kannst.
- Ersten Takt einfügen. Drücke Cmd+B (Mac/iPad) oder tippe auf „Takt einfügen“. Es erscheinen drei leere Zeilen, gefüllt mit Pausen (
-) und von senkrechten Strichen begrenzt. - Symbole eintippen. Setze den Cursor in die erste Zeile und tippe
x-x-x-x-x-x-x-x-für durchgehende Hi-Hat-Achtel. In die zweite Zeile:----o-------o---für den Snare-Backbeat auf 2 und 4. In die dritte Zeile:Q---Q---Q---Q---für eine Four-on-the-Floor-Kick. - Anhören. Drücke die Leertaste (oder den Play-Button). Du hörst deinen Beat sofort mit hochwertigen Drum-Sounds.
Das Ergebnis sieht so aus:
Herzlichen Glückwunsch — das ist ein kompletter Standard-Rock-Beat. Speichere mit Cmd+S. Von hier aus kannst du Takte hinzufügen, Symbole ändern, das Tempo einstellen, üben und exportieren. Lies weiter, um zu verstehen, warum diese Zeichen genau dort stehen.
Das Raster verstehen
Der Schlüssel zu Drum Charter ist das Positions-Raster. Jede Zeile eines Taktes ist in gleich große Felder unterteilt. Im 4/4-Takt sind das 16 Positionen — eine pro Sechzehntel-Note. Jedes Feld ist entweder ein Schlag (ein Symbol) oder eine Pause (-).
So zählst du die 16 Positionen eines 4/4-Taktes. Unter der Notation steht die übliche Schlagzeuger-Zählweise:
Lies das so: Die Viertel liegen auf den Positionen 1, 5, 9 und 13 (gezählt „1 – 2 – 3 – 4“). Die Achtel-Offbeats (das „und“) liegen dazwischen auf 3, 7, 11, 15. Eine Hi-Hat auf jedem Achtel besetzt also jede zweite Position: x-x-x-x-x-x-x-x-.
| Was du spielen willst | Positionen | Notation (16 Felder) |
|---|---|---|
| Viertel (1 2 3 4) | 1, 5, 9, 13 | x---x---x---x--- |
| Achtel (1+2+3+4+) | 1,3,5,7,9,11,13,15 | x-x-x-x-x-x-x-x- |
| Sechzehntel (alle) | 1–16 | xxxxxxxxxxxxxxxx |
| Backbeat-Snare (2 und 4) | 5, 13 | ----o-------o--- |
Aufbau eines Taktes
Jeder Takt besteht aus genau drei Zeilen, die immer zusammengehören. Sie entsprechen den drei „Etagen“ eines Schlagzeugs:
- Taktnummer (001, 002, ...): wird automatisch vergeben und fortlaufend nummeriert. Bis zu 999 Takte pro Chart.
- Senkrechte Striche
│: begrenzen den Inhalt jeder Zeile. Du musst sie nicht selbst tippen — sie entstehen beim Einfügen eines Taktes und beim Formatieren automatisch. Lösche sie nicht. - Positionen: 16 in 4/4, 12 in 3/4 und 6/8. Alle drei Zeilen eines Taktes müssen gleich lang sein.
- Pause: ein
-bedeutet Stille an dieser Position. Auch eine komplett leere Stelle wird beim Formatieren mit-aufgefüllt.
Die Symbol-Palette
Die Palette ist dein wichtigstes Werkzeug, besonders am Anfang. Sie ist kontextsensitiv: Sie zeigt immer nur die Symbole, die an deiner aktuellen Cursor-Zeile sinnvoll sind.
- Cursor in Zeile 1 → Palette zeigt Becken-Symbole.
- Cursor in Zeile 2 → Palette zeigt Snare, Toms, Cross-stick, Flam, Ghost, Kombinationen.
- Cursor in Zeile 3 → Palette zeigt Kick und Fuß-Hi-Hat.
Tippe auf ein Symbol, um es an der Cursor-Position einzufügen. Auf diese Weise kannst du ein ganzes Chart schreiben, ohne ein einziges Symbol auswendig zu kennen. Sobald du die häufigen Zeichen (x o Q -) drin hast, geht das direkte Tippen meist schneller.
Symbol-Referenz
Hier ist jedes Symbol mit Bedeutung und einer kurzen Empfehlung, wann du es einsetzt. Die Symbole sind nach Zeile gruppiert — genau so, wie sie in der Palette erscheinen.
Zeile 1 — Becken
| Symbol | Instrument | Wann verwenden? |
|---|---|---|
| x | Hi-Hat (geschlossen) | Der häufigste Becken-Sound. Trägt die meisten Grooves als gerades Achtel- oder Sechzehntel-Pattern. |
| ° | Hi-Hat (offen) | Offener, klingender Sound. Klassisch auf dem Offbeat („und“), z. B. in Disco und Rock, oder als Akzent vor dem Schließen. |
| * | Crash | Akzent am Anfang eines Abschnitts, nach einem Fill oder als Hochpunkt. Meist auf Zählzeit 1. |
| + | Ride | Ride-Cymbal — ruhigeres, definiertes Timekeeping. Oft im Verse, Chorus oder bei Jazz. |
| ± | Bell (Ride-Glocke) | Durchdringender, glockiger Klang. Für Akzente, Latin- und Fusion-Patterns. |
| ~ | China | Aggressiver, trashiger Sound. Breakdowns, Metal, harte Akzente. |
| ^ | Tambourine | Zusätzliche Percussion (montierbares Tambourine). Pop, Singer-Songwriter, Overdub-Feeling. |
Zeile 2 — Snare & Toms
| Symbol | Instrument | Wann verwenden? |
|---|---|---|
| o | Snare | Standard-Snare-Schlag. Der Backbeat auf 2 und 4 ist das Rückgrat fast jedes Grooves. |
| ö | Flam | Vorschlag + Hauptschlag (siehe Akzente & Dynamik). Für dicke Akzente, Marschrhythmen, Fill-Eröffnungen. |
| º | Ghost Note | Sehr leise Snare zwischen den Backbeats. Macht Funk- und R&B-Grooves lebendig. |
| t | Tom 1 (High Tom) | Höchster Tom. Anfang von Fills, melodische Tom-Linien. |
| i | Tom 2 (Mid Tom) | Mittlerer Tom. Mitte eines absteigenden Fills. |
| j | Floor Tom | Tiefster Tom. Ende von Fills, wuchtige Tom-Grooves (z. B. Bossa, Tribal). |
| / | Cross-stick | Stick quer auf dem Snare-Rand („Rimclick“). Holziger, leiser Klang für Balladen und ruhige Verses. |
| p | Snare + Tom 1 | Gleichzeitiger Schlag auf Snare und High Tom. Dicke Fill-Akzente. |
| d | Snare + Tom 2 | Gleichzeitiger Schlag auf Snare und Mid Tom. |
| g | Snare + Floor Tom | Gleichzeitiger Schlag auf Snare und Floor Tom. Kraftvolle, breite Akzente. |
Zeile 3 — Kick & Fuß
| Symbol | Instrument | Wann verwenden? |
|---|---|---|
| Q | Kick Drum | Standard-Bassdrum. Laut, durchsetzungsfähig — das Fundament des Grooves. |
| q | Soft Kick | Dieselbe Bassdrum, aber leiser angeschlagen. Für dynamische, leise Doppel-Kicks und Jazz-„Feathering“. |
| f | Fuß-Hi-Hat | Hi-Hat mit dem Fuß geschlossen („Chick“). Klassisch im Jazz auf 2 und 4 zum Timekeeping. |
Spezial-Symbole (in jeder Zeile)
| Symbol | Bedeutung | Beispiel |
|---|---|---|
| - | Pause / Stille | Jede unbesetzte Position |
| ³ | Triolen-Marker | x³xx = drei gleichmäßige Hi-Hats im Triolen-Gefühl |
q (Soft Kick) erscheint nicht als eigener Knopf in der Palette — du tippst es direkt. Klanglich ist es dieselbe Bassdrum wie Q, nur mit reduzierter Anschlagstärke.Akzente & Dynamik
Was einen Groove lebendig macht, sind nicht nur die Noten, sondern ihre Lautstärke. Drum Charter kennt drei spezielle Symbole, die genau dafür da sind. Sie klingen auch in der Wiedergabe unterschiedlich laut.
Ghost Notes º
Ghost Notes sind sehr leise Snare-Schläge (etwa halbe Lautstärke), die zwischen den lauten Backbeats sitzen. Sie sind das Geheimnis hinter dem „schwebenden“ Funk-Feel. Setze sie auf die Sechzehntel rund um die 2 und die 4:
Ein typischer Funk-Groove. Die Ghosts geben dem Beat seinen „Bounce“.
Flam ö
Ein Flam ist ein schneller Vorschlag dicht vor dem Hauptschlag — beide Hände fast gleichzeitig, leicht versetzt. Das erzeugt einen dickeren, breiteren Snare-Sound. In Drum Charter spielt der Vorschlag etwa 20 ms vor dem Hauptschlag (bei 120 BPM) und ist leiser:
Flams eignen sich hervorragend, um einzelne Schläge hervorzuheben — etwa den ersten Schlag eines Fills.
Soft Kick q
Wo Q die volle, laute Bassdrum ist, gibt dir q dieselbe Trommel leiser. Das ist nützlich für schnelle Doppel-Kicks, bei denen nur der erste Schlag betont sein soll, oder für das leise Mitlaufen der Bassdrum im Jazz:
Triolen
Eine Triole teilt eine Zählzeit nicht in zwei, sondern in drei gleiche Teile — das typische „tri-o-le“- oder Shuffle-Gefühl. In Drum Charter setzt du dafür den Marker ³ direkt nach der ersten Note der Dreiergruppe. Die drei Noten teilen sich dann den Platz, den sonst zwei Sechzehntel einnehmen wurden.
Ein vollständiges Beispiel im musikalischen Kontext — gerader Beat im ersten, Triolen im zweiten Takt:
x³x (nur zwei) wird beim Validieren und beim Export als Fehler markiert. Achte darauf, die Dreiergruppe vollständig zu schreiben.[Shuffle] plus Triolen-Fills entsteht ein besonders authentischer Jazz- und Blues-Feel.Wiederholungen
Kaum ein Song spielt jeden Takt nur einmal. Statt denselben Groove vier Mal zu kopieren, sagst du Drum Charter einfach, wie oft er wiederholt werden soll. Das halt dein Chart kurz und übersichtlich.
Einfache Wiederholung — ein Takt
Schreibe (4×) hinter den schließenden Strich der ersten Zeile eines Taktes:
Dieser Takt wird insgesamt 4 Mal gespielt (1 Original + 3 Wiederholungen). Die Zahl erscheint orange in der Notation. Du kannst jede Anzahl angeben, z. B. (2×) oder (8×).
Multi-Takt-Wiederholung — ein Block
Soll sich eine ganze Gruppe von Takten wiederholen, klammerst du sie mit den Wiederholungszeichen |: (Anfang) und :| (Ende) ein. Die Wiederholungszahl steht am Ende:
Die schnellsten Wege, die Marker zu setzen: Cmd+Shift+R fügt eine Start-Wiederholung ein, Cmd+Option+R eine End-Wiederholung.
|: braucht einen passenden End-Marker :|. Der End-Marker braucht eine Wiederholungszahl. Wiederholungs-Blöcke dürfen sich nicht verschachteln und sollten nicht über Abschnitts-Grenzen hinausreichen. Falls etwas nicht stimmt, zeigt dir die Validierung genau, welche Stelle das Problem ist.Metadaten-Direktiven
Direktiven stehen in eckigen Klammern am Anfang deines Charts, vor dem ersten Takt (in den ersten ca. 20 Zeilen). Sie steuern Tempo, Taktart, Feel und Modus. Pro Eigenschaft gilt: die erste Angabe gewinnt.
Tempo (BPM)
Gültiger Bereich: 60–200 BPM. Ohne Angabe verwendet Drum Charter 120 BPM. Du kannst das Tempo jederzeit auch über den Tempo-Regler in den Wiedergabe-Steuerungen ändern — und beim Export pro Datei überschreiben.
Taktart
Die Taktart bestimmt die Anzahl der Positionen pro Zeile und wie die Beats optisch gruppiert werden. Unterstützt sind 4/4, 3/4 und 6/8. Ein Taktart-Picker in der Oberfläche wechselt ebenfalls.
Swing & Shuffle
Swing verschiebt die Achtel-Offbeats (die Positionen 3, 7, 11, 15 in 4/4) zeitlich nach hinten und erzeugt so das „schwingende“ Shuffle-Gefühl. 50 % = völlig gerade, 67 % = klassischer Shuffle, 75 % = extrem. Swing wirkt nur in 4/4. Allein stehendes [Swing] oder [Shuffle] bedeutet 67 %.
Modus & Spalten
Mehr dazu unter Lyrics Mode und Concert Mode.
Abschnitts-Überschriften (Sections)
Sections strukturieren dein Chart visuell. Sie werden grün dargestellt und beim MusicXML-Export als Rehearsal Marks übertragen. Du kannst beliebige Namen verwenden — [SOLO], [BREAK], [PRE-CHORUS] — ganz wie es zu deinem Song passt. Schnell einfügen mit Cmd+Shift+S.
[3/4 - 140 BPM - Shuffle]. Das ist praktisch für einen kompakten Header.Komplette Beispiele
Theorie ist gut, Charts sind besser. Hier sind fünf vollständige, abspielbare Beispiele aus verschiedenen Stilen. Tippe sie ab oder nutze sie als Vorlage — und hörst sie dir mit Leertaste an.
1. Pop / Rock — der Allrounder
Der Beat, der unter geschätzt der Hälfte aller Popsongs liegt. Hi-Hat-Achtel, Backbeat, gerade Kick. Der Verse-Takt wiederholt sich, der zweite Takt hat einen kleinen Crash-Akzent.
2. Funk — mit Ghost Notes
Hier lebt der Groove von den leisen Snare-Ghosts und der Sechzehntel-Hi-Hat. Spiel ihn langsam an, dann mit Gefühl.
3. Jazz-Walzer in 3/4
Drei Viertel statt vier, 12 Positionen pro Zeile. Ride tragt den Beat, Fuß-Hi-Hat auf 2 und 3, leichte Kick.
4. Metal — treibend
China-Akzente, schnelle Doppel-Kicks, harte Backbeats. Hier zählt Wucht.
5. Ballade in 6/8
Ruhiges Compound-Feel. Cross-stick statt lauter Snare, sparsame Kick.
Wiedergabe
Jedes Chart ist sofort hörbar — das ist der Kern von Drum Charter. Die Wiedergabe nutzt hochwertige Drum-Samples (FluidR3_GM-Soundfont) und ein präzises 48tel-Timing-Raster, damit auch Triolen, Swing und Flams exakt sitzen.
- Play / Pause: Leertaste oder der Play-Button in den Wiedergabe-Steuerungen.
- Von Anfang an spielen: Cmd+P.
- Stopp: Cmd+. (Punkt).
- Tempo: über den Regler in den Steuerungen — unabhängig von der
[BPM]-Angabe im Chart.
Ein visuelles Metronom und ein Beat-Indikator zeigen dir während der Wiedergabe, wo im Takt du gerade bist. Swing-Positionen werden dabei orange hervorgehoben.
Practice Mode
Der Practice Mode ist deine Übungsumgebung. Er erscheint als Overlay am unteren Rand des Editors. Öffne ihn mit Cmd+Shift+P oder über das Menü.
Bar Loop — eine Stelle in der Schleife üben
Wähle im Editor den Takt, den du üben willst, und öffne den Practice Mode. Drücke Loop, um diesen Takt in einer Endlosschleife abzuspielen. Mit den +- und −-Buttons erweiterst du die Schleife auf 2 oder 4 Takte — perfekt, um einen Übergang oder einen Fill sauber einzuschleifen.
Übungstempo
Nutze den BPM-Stepper im Practice Mode, um das Tempo unabhängig vom Chart-Tempo zu setzen. Bewahrte Methode: Beginne deutlich langsamer als das Zieltempo, spiel die Stelle mehrmals sauber, und erhohe dann in kleinen Schritten. Das Übungstempo wird nicht im Chart gespeichert.
MIDI-Hit-Visualisierung
Verbindest du ein E-Drum-Set (siehe MIDI E-Drums) und spielst während des Loops mit, erscheinen Cyan-Streifen auf der Notation. Sie zeigen, wo deine Schläge zeitlich tatsächlich landen:
- Streifen genau auf einer Note → perfektes Timing.
- Streifen vor der Note → du eilst (spielst zu früh).
- Streifen nach der Note → du schleppst (spielst zu spät).
So siehst du in Echtzeit, ob du im Pocket sitzt — eine ehrliche, visuelle Rückmeldung, die ein reines Metronom nicht geben kann.
Live-BPM-Erkennung
Das BPM-Widget zeigt dein aktuelles Tempo in Echtzeit, berechnet aus deinen MIDI-Schlägen. Ein Trend-Pfeil verrat dir, ob du gerade schneller oder langsamer wirst — das klassische „Rushing oder Dragging“.
MIDI E-Drums anschließen
Drum Charter empfängt MIDI von elektronischen Drum-Sets — per USB (z. B. über einen Camera-Adapter am iPhone/iPad oder direkt am Mac) oder per Bluetooth MIDI.
- Verbinde dein E-Drum-Modul per USB oder koppele es als Bluetooth-MIDI-Gerät.
- Öffne den Practice Mode oder den Concert Mode — erst dort wird die MIDI-Verbindung aktiv abgehört.
- Spiel ein paar Schläge. Die Live-BPM-Anzeige und (im Practice Mode) die Hit-Streifen reagieren sofort.
Latenz-Kompensation
Jedes Audio-Interface hat eine kleine Verzögerung zwischen Schlag und hörbarem Ton. Unter Einstellungen → Latenz-Kompensation stellst du einen Offset zwischen 0 und 60 ms ein (Standard: 30 ms), damit die Hit-Visualisierung exakt zu dem passt, was du hörst. Taste dich heran, bis die Cyan-Streifen mittig auf deinen sauber gespielten Noten sitzen.
Concert Mode
Der Concert Mode ist deine Bühnenansicht — Vollbild, große Schrift, keine Menüs, keine Ablenkung. Genau das, was du auf einem Notenständer oder Tablet-Halter vor dir haben willst.
Öffnen
- Einzelnes Chart: Cmd+Shift+C — öffnet das aktuelle Dokument im Vollbild.
- Ganzer Ordner: Cmd+Shift+F — öffnet alle Charts eines Ordners als Playlist. Du blätterst dann während des Gigs durch dein komplettes Set.
Wiedergabe direkt auf der Bühne (neu in 2.0)
Aktiviere Playback Controls in den Concert-Einstellungen, dann kannst du direkt im Vollbild abspielen:
- Leertaste — Play / Pause
- ← / → — 4 Takte zurück bzw. vor springen
- oder die Buttons im BPM-Widget oben rechts
Beim Betreten des Concert Mode stoppt die Editor-Wiedergabe automatisch, damit nichts doppelt klingt.
Einstellungen (Zahnrad-Symbol)
| Option | Beschreibung |
|---|---|
| Takte pro Zeile | 4 oder 6 auf iPad/Mac, 2 oder 4 auf dem iPhone. Antippen schaltet um. |
| Schriftgröße | 10–40 pt, über die +/−-Buttons. Aus der Distanz gut lesbar einstellen. |
| Visuelles Metronom | Puls-Animation mit BPM-Anzeige im Widget. |
| Click Sound | Hörbarer Wood-Block-Click — ideal mit In-Ear-Monitoring. |
| MIDI BPM Detection | Echtzeit-Tempo-Erkennung von deinem E-Drum-Set. |
| Playback Controls | Schaltet die Wiedergabe-Buttons und Tastaturkürzel frei. |
Natives macOS-Vollbild
Auf dem Mac öffnet der Concert Mode einen eigenen Vollbild-Space; die Menüleiste blendet sich automatisch aus. Eine echte, immersive Bühnenansicht. Zum Verlassen: Escape oder das ×-Symbol oben rechts.
Beat-Grouping-Hintergrund
Dezente Streifen im Hintergrund gruppieren die Viertel-Schläge optisch und helfen dir, beim schnellen Lesen die Position im Takt zu finden. Du kannst sie in den Einstellungen ein- und ausschalten und ihre Deckkraft für den hellen und dunklen Modus getrennt feinjustieren.
Mehrspaltige Lyrics
Enthält ein Lyrics-Chart die Direktive [columns: 2] oder [columns: 3], wird der Text im Concert Mode mehrspaltig gesetzt — so passt eine ganze Songseite auf den Bildschirm. Die Spaltenzahl wird automatisch an die verfügbare Breite angepasst (auf dem iPhone immer einspaltig). Der Umbruch erfolgt an Leerzeilen, sodass Strophen zusammenbleiben.
Lyrics Mode
Der Lyrics Mode ist für Multiinstrumentalisten und Bandleader, die neben Drum-Charts auch reine Songtext-Charts brauchen — Texte, Akkorde, Bühnen-Hinweise. Aktiviere ihn mit der Direktive [mode: lyrics] oder per Cmd+L.
Farbcodierung im Lyrics Mode:
- Grün: Abschnitts-Überschriften wie
[VERSE],[CHORUS]. - Blau: Akkord-Symbole (Am, F, G7, Cmaj7, ...).
- Grau: Hinweiszeilen, die mit
→beginnen — für Regie- und Bühnen-Notizen.
Du kannst sogar einzelne Drum-Takte einbetten: Schreibe sie wie gewohnt mitten in den Text. Drum Charter erkennt sie automatisch, stellt sie in der DrumCharter-Schriftart dar und spielt sie ab. So liegen Groove und Text in einem einzigen Dokument.
Exportieren
Dein Chart muss Drum Charter nicht verlassen, um nützlich zu sein — aber es kann. Vier Export-Wege bringen deine Arbeit in andere Programme, auf Papier oder in deine DAW.
MusicXML — Cmd+Shift+X
MusicXML ist das universelle Austauschformat für Notensatz. Damit öffnest du dein Chart als echte Standardnotation in professionellen Programmen.
- Wähle Export → MusicXML. Im Dialog kannst du BPM und Taktart bestätigen und festlegen, ob die Snare/Tom-Stimme (mittlere Zeile) nach oben (zu den Becken) oder nach unten (zu den Füßen) notiert wird.
- Speichere die
.musicxml-Datei. - Öffne sie in MuseScore, Sibelius, Dorico oder Finale — einfach über Datei → Öffnen. Die Drum-Notation erscheint sofort auf einem Percussion-System.
Was wird übertragen? Zwei-Stimmen-Notation mit korrekten Balken, Taktarten (4/4, 3/4, 6/8), Triolen, Wiederholungen, Flams, Ghost-Noteheads und Sections als Rehearsal Marks.
MIDI-Datei — Cmd+Shift+M
Standard-MIDI-Dateien (.mid) lassen sich in jede DAW importieren — Logic Pro, GarageBand, Ableton Live, FL Studio, Cubase.
- Wähle Export → MIDI File. Du kannst BPM überschreiben und — wie bei MusicXML — wählen, ob die Snare/Tom-Stimme nach oben (zu den Becken) oder nach unten (zu den Füßen) gruppiert wird.
- Speichere die
.mid-Datei und importiere sie in deine DAW.
Der Export nutzt das General-MIDI-Drum-Mapping auf Kanal 10 und überträgt Swing, Triolen, Flams und Ghost Notes. Kompatibel u. a. mit MuseScore, Logic Pro und Sibelius.
PDF — Cmd+Shift+D
Exportiere dein Chart als PDF, wahlweise mit den dezenten Beat-Grouping-Streifen als visuelle Timing-Hilfe. Perfekt zum Ausdrucken für den Notenständer oder zum Teilen mit Bandkollegen. Funktioniert auf iPhone, iPad und Mac — auch über das Share-Sheet.
Multi-Column-Export — Cmd+Shift+E
Erzeugt eine besonders kompakte, mehrspaltige Darstellung deines Charts — nützlich, wenn ein länger Song auf möglichst wenige Seiten passen soll.
Einstellungen
Öffne die Einstellungen mit Cmd+,. Die wichtigsten Optionen:
| Einstellung | Bereich / Standard | Wirkung |
|---|---|---|
| Concert-Schriftgröße | 10–40 pt (Standard 13) | Startgröße der Notation im Concert Mode. |
| Latenz-Kompensation | 0–60 ms (Standard 30) | Gleicht die Verzögerung deines Audio-Interfaces für die MIDI-Hit-Visualisierung aus. |
| Beat Grouping anzeigen | an / aus | Dezente Hintergrund-Streifen, die die Viertel optisch gruppieren. |
| Beat-Grouping-Deckkraft | 0,02–0,25 | Getrennt einstellbar für hellen und dunklen Modus. |
| MIDI Debug Log | an / aus | Protokolliert eingehende MIDI-Daten — nur für die Fehlersuche. |
Tastatur-Shortcuts
Auf Mac und iPad (mit externer Tastatur) beschleunigen Shortcuts die Arbeit enorm. Diese Liste entspricht exakt den Menübefehlen der App.
Bearbeiten & Notation
| Shortcut | Funktion |
|---|---|
| Cmd+N | Neues Dokument |
| Cmd+S | Speichern |
| Cmd+B | Neuen Takt einfügen |
| Cmd+T | Aktuellen Takt als Vorlage merken |
| Cmd+Shift+S | Section einfügen ([VERSE], [CHORUS], ...) |
| Cmd+Shift+R | Start-Wiederholung einfügen (|:) |
| Cmd+Option+R | End-Wiederholung einfügen (:|) |
| Cmd+L | Lyrics Mode umschalten |
| Cmd+, | Einstellungen |
Wiedergabe
| Shortcut | Funktion |
|---|---|
| Leertaste | Play / Pause |
| Cmd+P | Von Anfang an spielen |
| Cmd+. | Wiedergabe stoppen |
Export
| Shortcut | Funktion |
|---|---|
| Cmd+Shift+X | Export nach MusicXML |
| Cmd+Shift+M | Export nach MIDI |
| Cmd+Shift+D | Export nach PDF |
| Cmd+Shift+E | Multi-Column-Export |
Modi
| Shortcut | Funktion |
|---|---|
| Cmd+Shift+C | Concert Mode (einzelnes Chart) |
| Cmd+Shift+F | Concert Mode (ganzer Ordner) |
| Cmd+Shift+P | Practice Mode |
| Cmd+? | Hilfe |
Im Concert Mode
| Shortcut | Funktion |
|---|---|
| Leertaste | Play / Pause (wenn Playback Controls aktiv) |
| ← / → | 4 Takte zurück / vor |
| Escape | Concert Mode verlassen |
Praxis-Workflows
Einen Song transkribieren
- Höre den Song und bestimme Tempo und Taktart. Schreibe z. B.
[120 BPM]und[4/4]an den Anfang. Hat der Song ein schwingendes Gefühl, ergänze[Shuffle]. - Notiere die Struktur mit Sections:
[INTRO],[VERSE],[CHORUS],[BRIDGE],[OUTRO]. - Lege den Grundgroove fest. Meist reicht ein Takt mit
(4×)oder(8×)für einen ganzen Abschnitt. - Notiere nur die Takte aus, die vom Grundgroove abweichen — Fills, Breaks, Übergänge. Alles andere bleibt eine Wiederholung.
- Spiele den Original-Song parallel (Apple Music/Spotify) und drücke in Drum Charter Play, um deine Transkription gegenzuhören.
Ein Set für den Gig vorbereiten
- Speichere alle Songs eines Sets in einem Ordner in iCloud Drive — in der Reihenfolge, in der du sie spielst (z. B. mit führenden Nummern im Dateinamen).
- Öffne den Concert Mode mit Cmd+Shift+F (ganzer Ordner) — du erhältst eine durchblätterbare Playlist.
- Stelle Schriftgröße und Takte pro Zeile so ein, dass du alles aus deiner Spielposition sicher lesen kannst.
- Aktiviere bei Bedarf den Click (mit In-Ear) und die MIDI-BPM-Erkennung.
Eine schwierige Stelle üben
- Markiere den kritischen Takt und öffne den Practice Mode (Cmd+Shift+P).
- Setze die Schleife mit Loop, erweitere sie bei Übergängen mit + auf 2 Takte.
- Reduziere das Übungstempo deutlich. Spiele die Stelle 5–10 Mal fehlerfrei.
- Verbinde deine E-Drums und beobachte die Cyan-Hit-Streifen — ziele darauf, sie mittig auf die Noten zu legen. Erhöhe das Tempo erst dann.
Fehlerbehebung
Kein Sound bei der Wiedergabe
- iPhone: Prüfe den Silent-Switch an der Geräteseite.
- Prüfe die Medien-Lautstärke (nicht die Klingelton-Lautstärke).
- Bluetooth-Kopfhörer: verbunden und als Ausgabe ausgewählt?
- Starte die App einmal neu — die Audio-Engine wird beim ersten Play initialisiert.
MIDI E-Drums werden nicht erkannt
- Prüfe die USB- bzw. Bluetooth-MIDI-Verbindung.
- Öffne Practice- oder Concert Mode — nur dort wird MIDI aktiv abgehört.
- Stelle sicher, dass MIDI BPM Detection im jeweiligen Modus aktiviert ist.
- Manche Interfaces brauchen einen App-Neustart nach dem Verbinden.
Validierung zeigt einen Fehler
- Öffne das Validieren-Werkzeug. Jeder Fehler nennt seine Fundstelle, damit du ihn schnell findest.
- Triolen brauchen genau drei Noten nach dem
³-Marker. - Zeilenlängen: Alle drei Zeilen eines Taktes müssen gleich lang sein. Das automatische Formatieren (Return am Zeilenende) hilft.
- Wiederholungen: Jeder Start-Marker
|:braucht einen End-Marker:|mit Wiederholungszahl.
Concert Mode zeigt nur 1 Spalte trotz [columns: 3]
- Mehrspaltige Lyrics gibt es nur im Lyrics Mode, nicht im Drum Mode.
- Auf dem iPhone ist die Darstellung immer einspaltig.
- Die Spaltenzahl wird an die Breite angepasst: Bei zu schmalem Fenster oder größer Schrift reduziert Drum Charter automatisch auf 2 oder 1 Spalte, damit nichts überläuft.
Glossar
| Begriff | Bedeutung |
|---|---|
| Backbeat | Die betonten Snare-Schläge auf Zählzeit 2 und 4 — das Rückgrat von Rock und Pop. |
| BPM | Beats per Minute — das Tempo, gemessen in Viertel-Schlägen pro Minute. |
| Four-on-the-Floor | Kick auf jeder Viertel (1 2 3 4). Typisch für Disco und House. |
| Ghost Note | Sehr leiser Snare-Schlag, der den Groove füllt, ohne zu dominieren. |
| Flam | Zwei dicht versetzte Schläge als ein dicker Akzent. |
| Offbeat | Das „und“ zwischen den Viertel-Schlägen. |
| Das Gefühl, perfekt im Timing zu sitzen — weder eilend noch schleppend. | |
| Position | Eines der 16 (bzw. 12) Felder pro Zeile. Kleinste Zeiteinheit im Raster. |
| Rehearsal Mark | Beschriftung im Notensatz (z. B. „Chorus“) — entsteht aus deinen Sections beim MusicXML-Export. |
| Shuffle / Swing | Rhythmisches Gefühl, bei dem die Offbeats nach hinten verschoben sind. |
| Stem (Notenhals) | Die Richtung der Notenhälse trennt im Notensatz die Stimmen (Hände/Füße). |
Kontakt & Support
Brauchst du Hilfe?
Schreib uns eine E-Mail — wir antworten innerhalb von 24–48 Stunden.
support@drumcharter.quantum-locked.netBug melden
Damit wir dir schnell helfen können, sende uns bitte:
- Gerät (z. B. „iPad Pro 13 Zoll“, „MacBook Air M2“)
- Betriebssystem-Version (z. B. „iPadOS 18.1“, „macOS 15.2“)
- Drum Charter Version (Einstellungen → Über)
- Was genau passiert ist — und was du erwartet hättest
- Schritte zum Nachstellen des Problems
- Optional: Screenshot oder Bildschirmaufnahme
Welcome to Drum Charter
This guide takes you from your very first beat to the stage. You don't have to read it front to back — use the sidebar to jump straight to whatever you need right now. Never written a chart before? Start with the Quick Start. Looking something up? Head to the Symbol Reference or the Shortcut table.
Drum Charter is a text-based drum notation app. Instead of dragging notes onto a staff with a mouse, you type simple characters — x for hi-hat, o for snare, Q for kick. It sounds unusual at first, but in practice it's lightning fast: a full groove is written in seconds, instantly audible, and synced across all your Apple devices.
What you'll find here
- Quick Start in 2 minutes
- Understanding the grid
- Structure of a bar
- The symbol palette
- Symbol reference
- Accents & dynamics
- Triplets
- Repeats
- Metadata directives
- Complete examples
- Playback
- Practice Mode
- MIDI e-drums
- Concert Mode
- Lyrics Mode
- Exporting
- Settings
- Keyboard shortcuts
- Practical workflows
- Troubleshooting
- Glossary
- Contact & support
Quick Start: Your first chart in 2 minutes
In four steps you'll have your first beat written, heard, and saved. No prior knowledge needed.
- Create a new document. Open Drum Charter and create a new document. On Mac and iPad: Cmd+N. On iPhone: tap the + icon. Drum Charter is a document-based app — each chart is a file you can store in iCloud Drive, „On My iPhone,“ or anywhere else.
- Insert your first bar. Press Cmd+B (Mac/iPad) or tap „Insert Bar.“ Three empty lines appear, filled with rests (
-) and bounded by vertical bars. - Type symbols. Place the cursor in the first line and type
x-x-x-x-x-x-x-x-for steady eighth-note hi-hat. In the second line:----o-------o---for the snare backbeat on 2 and 4. In the third line:Q---Q---Q---Q---for a four-on-the-floor kick. - Listen. Press Space (or the Play button). You'll hear your beat instantly with high-quality drum sounds.
The result looks like this:
Congratulations — that's a complete standard rock beat. Save with Cmd+S. From here you can add bars, change symbols, set the tempo, practice, and export. Read on to understand why these characters sit exactly where they do.
Understanding the grid
The key to Drum Charter is the position grid. Each line of a bar is divided into equal slots. In 4/4 time there are 16 positions — one per sixteenth note. Each slot is either a hit (a symbol) or a rest (-).
Here's how to count the 16 positions of a 4/4 bar, with the usual drummer's counting underneath:
Read it like this: the quarter notes fall on positions 1, 5, 9, and 13 (counted „1 – 2 – 3 – 4“). The eighth-note offbeats (the „and“) sit between them on 3, 7, 11, 15. So a hi-hat on every eighth fills every other position: x-x-x-x-x-x-x-x-.
| What you want to play | Positions | Notation (16 slots) |
|---|---|---|
| Quarters (1 2 3 4) | 1, 5, 9, 13 | x---x---x---x--- |
| Eighths (1+2+3+4+) | 1,3,5,7,9,11,13,15 | x-x-x-x-x-x-x-x- |
| Sixteenths (all) | 1–16 | xxxxxxxxxxxxxxxx |
| Backbeat snare (2 and 4) | 5, 13 | ----o-------o--- |
Structure of a bar
Every bar consists of exactly three lines that always belong together. They mirror the three „tiers“ of a drum kit:
- Bar number (001, 002, ...): assigned automatically and numbered consecutively. Up to 999 bars per chart.
- Vertical bars
│: delimit the content of each line. You don't have to type them — they appear when you insert a bar and when you format. Don't delete them. - Positions: 16 in 4/4, 12 in 3/4 and 6/8. All three lines of a bar must be the same length.
- Rest: a
-means silence at that position. Empty slots are filled with-when you format.
The symbol palette
The palette is your most important tool, especially at the start. It's context-sensitive: it always shows only the symbols that make sense for your current cursor line.
- Cursor in line 1 → palette shows cymbal symbols.
- Cursor in line 2 → palette shows snare, toms, cross-stick, flam, ghost, combinations.
- Cursor in line 3 → palette shows kick and foot hi-hat.
Tap a symbol to insert it at the cursor. This way you can write an entire chart without knowing a single symbol by heart. Once the common ones (x o Q -) are in your fingers, typing directly is usually faster.
Symbol reference
Here's every symbol with its meaning and a short note on when to use it. Symbols are grouped by line — exactly how they appear in the palette.
Line 1 — Cymbals
| Symbol | Instrument | When to use |
|---|---|---|
| x | Hi-Hat (closed) | The most common cymbal sound. Carries most grooves as a straight eighth- or sixteenth-note pattern. |
| ° | Hi-Hat (open) | Open, ringing sound. Classic on the offbeat (the „and“) in disco and rock, or as an accent before closing. |
| * | Crash | Accent at the start of a section, after a fill, or as a peak. Usually on beat 1. |
| + | Ride | Ride cymbal — calmer, more defined timekeeping. Often in verse, chorus, or jazz. |
| ± | Bell (ride bell) | Piercing, bell-like sound. For accents, Latin, and fusion patterns. |
| ~ | China | Aggressive, trashy sound. Breakdowns, metal, hard accents. |
| ^ | Tambourine | Extra percussion (mounted tambourine). Pop, singer-songwriter, overdub feel. |
Line 2 — Snare & Toms
| Symbol | Instrument | When to use |
|---|---|---|
| o | Snare | Standard snare hit. The backbeat on 2 and 4 is the backbone of nearly every groove. |
| ö | Flam | Grace note + main hit (see Accents & Dynamics). For thick accents, march rhythms, fill openers. |
| º | Ghost Note | Very quiet snare between the backbeats. Brings funk and R&B grooves to life. |
| t | Tom 1 (high tom) | Highest tom. Start of fills, melodic tom lines. |
| i | Tom 2 (mid tom) | Middle tom. Middle of a descending fill. |
| j | Floor Tom | Lowest tom. End of fills, heavy tom grooves (e.g. bossa, tribal). |
| / | Cross-stick | Stick across the snare rim („rim click“). Woody, quiet sound for ballads and calm verses. |
| p | Snare + Tom 1 | Simultaneous hit on snare and high tom. Thick fill accents. |
| d | Snare + Tom 2 | Simultaneous hit on snare and mid tom. |
| g | Snare + Floor Tom | Simultaneous hit on snare and floor tom. Powerful, wide accents. |
Line 3 — Kick & Foot
| Symbol | Instrument | When to use |
|---|---|---|
| Q | Kick Drum | Standard bass drum. Loud and assertive — the foundation of the groove. |
| q | Soft Kick | Same bass drum, struck more quietly. For dynamic quiet double kicks and jazz „feathering.“ |
| f | Foot Hi-Hat | Hi-hat closed with the foot (the „chick“). Classic jazz timekeeping on 2 and 4. |
Special symbols (any line)
| Symbol | Meaning | Example |
|---|---|---|
| - | Rest / silence | Any unoccupied position |
| ³ | Triplet marker | x³xx = three evenly spaced hi-hats in a triplet feel |
q (soft kick) has no dedicated button in the palette — type it directly. It's the same bass drum sound as Q, just with reduced attack.Accents & Dynamics
What makes a groove come alive isn't just the notes — it's their volume. Drum Charter has three special symbols for exactly that, and they really do play back at different volumes.
Ghost notes º
Ghost notes are very quiet snare hits (about half volume) sitting between the loud backbeats. They're the secret behind that „floating“ funk feel. Place them on the sixteenths around beats 2 and 4:
A typical funk groove. The ghosts give the beat its bounce.
Flam ö
A flam is a quick grace note just before the main hit — both hands almost together, slightly offset. It produces a thicker, wider snare sound. In Drum Charter the grace note plays about 20 ms before the main hit (at 120 BPM) and quieter:
Flams are great for emphasizing a single hit — like the first stroke of a fill.
Soft kick q
Where Q is the full, loud bass drum, q gives you the same drum quietly. Useful for fast double kicks where only the first should be accented, or for the bass drum quietly running underneath in jazz:
Triplets
A triplet divides a beat not into two but into three equal parts — that classic „trip-le-t“ or shuffle feel. In Drum Charter you mark it with ³ right after the first note of the group of three. The three notes then share the space two sixteenths would normally take.
A complete example in musical context — straight beat in the first bar, triplets in the second:
x³x (only two) is flagged as an error when validating and exporting. Make sure to write the full group of three.[Shuffle] plus triplet fills creates a particularly authentic jazz and blues feel.Repeats
Hardly any song plays each bar just once. Instead of copying the same groove four times, simply tell Drum Charter how often to repeat it. This keeps your chart short and readable.
Simple repeat — one bar
Write (4×) after the closing bar of the first line of a measure:
This bar plays 4 times total (1 original + 3 repeats). The number appears orange in the notation. Use any count you like, e.g. (2×) or (8×).
Multi-bar repeat — a block
To repeat a whole group of bars, bracket them with the repeat signs |: (start) and :| (end). The repeat count goes at the end:
Quickest way to place the markers: Cmd+Shift+R inserts a start repeat, Cmd+Option+R an end repeat.
|: needs a matching end marker :|. The end marker needs a repeat count. Repeat blocks may not nest and shouldn't span section boundaries. If something's off, validation tells you exactly where.Metadata directives
Directives go in square brackets at the top of your chart, before the first bar (within roughly the first 20 lines). They control tempo, time signature, feel, and mode. For each property the first value wins.
Tempo (BPM)
Valid range: 60–200 BPM. Without it, Drum Charter uses 120 BPM. You can change tempo anytime via the slider in the playback controls — and override it per file on export.
Time signature
The time signature sets the number of positions per line and how beats are visually grouped. Supported: 4/4, 3/4, and 6/8. A time-signature picker in the UI switches too.
Swing & Shuffle
Swing pushes the eighth-note offbeats (positions 3, 7, 11, 15 in 4/4) later in time, creating that „loping“ shuffle feel. 50% = perfectly straight, 67% = classic shuffle, 75% = extreme. Swing only applies in 4/4. A bare [Swing] or [Shuffle] means 67%.
Mode & columns
More under Lyrics Mode and Concert Mode.
Section headers
Sections structure your chart visually. They're shown in teal and transfer as rehearsal marks in MusicXML export. Use any name you like — [SOLO], [BREAK], [PRE-CHORUS] — whatever fits your song. Insert quickly with Cmd+Shift+S.
[3/4 - 140 BPM - Shuffle]. Handy for a compact header.Complete examples
Theory is good, charts are better. Here are five complete, playable examples across different styles. Type them out or use them as templates — and hear them with Space.
1. Pop / Rock — the all-rounder
The beat under an estimated half of all pop songs. Eighth-note hi-hat, backbeat, straight kick. The verse bar repeats; the second bar adds a small crash accent.
2. Funk — with ghost notes
Here the groove lives on the quiet snare ghosts and the sixteenth-note hi-hat. Start slow, then play it with feel.
3. Jazz waltz in 3/4
Three quarters instead of four, 12 positions per line. Ride carries the beat, foot hi-hat on 2 and 3, light kick.
4. Metal — driving
China accents, fast double kicks, hard backbeats. Here it's all about power.
5. Ballad in 6/8
Calm compound feel. Cross-stick instead of loud snare, sparse kick.
Playback
Every chart is instantly audible — that's the heart of Drum Charter. Playback uses high-quality drum samples (FluidR3_GM soundfont) and a precise 48th-note timing grid, so triplets, swing, and flams sit exactly right.
- Play / Pause: Space or the Play button in the playback controls.
- Play from the beginning: Cmd+P.
- Stop: Cmd+. (period).
- Tempo: via the slider in the controls — independent of the
[BPM]value in the chart.
A visual metronome and a beat indicator show you where in the bar you are during playback. Swing positions are highlighted in orange.
Practice Mode
Practice Mode is your rehearsal environment. It appears as an overlay at the bottom of the editor. Open it with Cmd+Shift+P or from the menu.
Bar Loop — practice one spot on repeat
Select the bar you want to practice in the editor and open Practice Mode. Press Loop to play that bar in an infinite loop. Use the + and − buttons to expand the loop to 2 or 4 bars — perfect for grooving a transition or fill clean.
Practice tempo
Use the BPM stepper in Practice Mode to set the tempo independently of the chart tempo. Proven method: start well below your target tempo, play the spot cleanly several times, then increase in small steps. The practice tempo is not saved to the chart.
MIDI hit visualization
Connect an e-drum set (see MIDI e-drums) and play along with the loop — cyan stripes appear on the notation. They show where your hits actually land in time:
- Stripe exactly on a note → perfect timing.
- Stripe before the note → you're rushing (playing early).
- Stripe after the note → you're dragging (playing late).
So you see in real time whether you're in the pocket — honest, visual feedback that a plain metronome can't give.
Live BPM detection
The BPM widget shows your current tempo in real time, computed from your MIDI hits. A trend arrow tells you whether you're speeding up or slowing down — the classic „rushing or dragging.“
Connecting MIDI e-drums
Drum Charter receives MIDI from electronic drum kits — via USB (e.g. through a camera adapter on iPhone/iPad, or directly on a Mac) or via Bluetooth MIDI.
- Connect your e-drum module via USB or pair it as a Bluetooth MIDI device.
- Open Practice Mode or Concert Mode — only there is the MIDI connection actively listened to.
- Play a few hits. The live BPM display and (in Practice Mode) the hit stripes react instantly.
Latency compensation
Every audio interface has a small delay between hit and audible sound. Under Settings → Latency Compensation you set an offset between 0 and 60 ms (default: 30 ms) so the hit visualization matches what you hear. Dial it in until the cyan stripes sit centered on your cleanly played notes.
Concert Mode
Concert Mode is your stage view — fullscreen, large font, no menus, zero distractions. Exactly what you want in front of you on a music stand or tablet holder.
Opening
- Single chart: Cmd+Shift+C — opens the current document fullscreen.
- Entire folder: Cmd+Shift+F — opens all charts in a folder as a playlist. You page through your whole set during the gig.
Playback right on stage (new in 2.0)
Enable Playback Controls in the Concert settings, then you can play back directly in fullscreen:
- Space — Play / Pause
- ← / → — skip back / forward 4 bars
- or the buttons in the BPM widget at the top right
When you enter Concert Mode, editor playback stops automatically so nothing plays twice.
Settings (gear icon)
| Option | Description |
|---|---|
| Bars per line | 4 or 6 on iPad/Mac, 2 or 4 on iPhone. Tap to toggle. |
| Font size | 10–40 pt via the +/− buttons. Set it large enough to read at a distance. |
| Visual metronome | Pulse animation with BPM display in the widget. |
| Click sound | Audible wood-block click — ideal with in-ear monitoring. |
| MIDI BPM Detection | Real-time tempo detection from your e-drum kit. |
| Playback Controls | Unlocks the playback buttons and keyboard shortcuts. |
Native macOS fullscreen
On Mac, Concert Mode enters its own fullscreen Space; the menu bar auto-hides. A truly immersive stage view. To exit: Escape or the × button at the top right.
Beat grouping background
Subtle background stripes visually group the quarter beats and help you find your place in the bar when reading fast. You can toggle them in Settings and fine-tune their opacity separately for light and dark mode.
Multi-column lyrics
If a lyrics chart includes [columns: 2] or [columns: 3], the text is set in multiple columns in Concert Mode — so a whole song page fits on screen. The column count adapts automatically to the available width (always single column on iPhone). Splits happen at blank lines, keeping verses together.
Lyrics Mode
Lyrics Mode is for multi-instrumentalists and bandleaders who need pure lyric charts alongside their drum charts — text, chords, stage cues. Enable it with the [mode: lyrics] directive or via Cmd+L.
Color coding in Lyrics Mode:
- Teal: section headers like
[VERSE],[CHORUS]. - Blue: chord symbols (Am, F, G7, Cmaj7, ...).
- Gray: cue lines starting with
→— for direction and stage notes.
You can even embed individual drum bars: write them as usual right in the text. Drum Charter detects them automatically, renders them in the DrumCharter font, and plays them back. Groove and lyrics live in a single document.
Exporting
Your chart doesn't have to leave Drum Charter to be useful — but it can. Four export paths bring your work into other programs, onto paper, or into your DAW.
MusicXML — Cmd+Shift+X
MusicXML is the universal exchange format for engraving. It lets you open your chart as real standard notation in professional software.
- Choose Export → MusicXML. In the dialog you can confirm BPM and time signature, and choose whether the snare/tom voice (middle line) is notated up (with the cymbals) or down (with the feet).
- Save the
.musicxmlfile. - Open it in MuseScore, Sibelius, Dorico, or Finale — just via File → Open. The drum notation appears instantly on a percussion staff.
What transfers? Two-voice notation with correct beaming, time signatures (4/4, 3/4, 6/8), triplets, repeats, flams, ghost noteheads, and sections as rehearsal marks.
MIDI file — Cmd+Shift+M
Standard MIDI files (.mid) import into any DAW — Logic Pro, GarageBand, Ableton Live, FL Studio, Cubase.
- Choose Export → MIDI File. You can override BPM and — as with MusicXML — choose whether the snare/tom voice groups up (with cymbals) or down (with feet).
- Save the
.midfile and import it into your DAW.
The export uses the General MIDI drum mapping on channel 10 and carries over swing, triplets, flams, and ghost notes. Compatible with MuseScore, Logic Pro, Sibelius, and more.
PDF — Cmd+Shift+D
Export your chart as a PDF, optionally with the subtle beat-grouping stripes as a visual timing aid. Perfect for printing for the music stand or sharing with bandmates. Works on iPhone, iPad, and Mac — also via the share sheet.
Multi-column export — Cmd+Shift+E
Creates an especially compact, multi-column rendering of your chart — useful when a long song should fit on as few pages as possible.
Settings
Open Settings with Cmd+,. The most important options:
| Setting | Range / default | Effect |
|---|---|---|
| Concert font size | 10–40 pt (default 13) | Starting size of the notation in Concert Mode. |
| Latency compensation | 0–60 ms (default 30) | Compensates your audio interface's delay for the MIDI hit visualization. |
| Show Beat Grouping | on / off | Subtle background stripes that visually group the quarters. |
| Beat grouping opacity | 0.02–0.25 | Adjustable separately for light and dark mode. |
| MIDI Debug Log | on / off | Logs incoming MIDI data — for troubleshooting only. |
Keyboard shortcuts
On Mac and iPad (with an external keyboard), shortcuts speed up your work enormously. This list matches the app's menu commands exactly.
Edit & notation
| Shortcut | Function |
|---|---|
| Cmd+N | New document |
| Cmd+S | Save |
| Cmd+B | Insert new bar |
| Cmd+T | Use current bar as template |
| Cmd+Shift+S | Insert section ([VERSE], [CHORUS], ...) |
| Cmd+Shift+R | Insert start repeat (|:) |
| Cmd+Option+R | Insert end repeat (:|) |
| Cmd+L | Toggle Lyrics Mode |
| Cmd+, | Settings |
Playback
| Shortcut | Function |
|---|---|
| Space | Play / Pause |
| Cmd+P | Play from beginning |
| Cmd+. | Stop playback |
Export
| Shortcut | Function |
|---|---|
| Cmd+Shift+X | Export to MusicXML |
| Cmd+Shift+M | Export to MIDI |
| Cmd+Shift+D | Export to PDF |
| Cmd+Shift+E | Multi-column export |
Modes
| Shortcut | Function |
|---|---|
| Cmd+Shift+C | Concert Mode (single chart) |
| Cmd+Shift+F | Concert Mode (entire folder) |
| Cmd+Shift+P | Practice Mode |
| Cmd+? | Help |
In Concert Mode
| Shortcut | Function |
|---|---|
| Space | Play / Pause (when playback controls are on) |
| ← / → | Skip back / forward 4 bars |
| Escape | Exit Concert Mode |
Practical workflows
Transcribing a song
- Listen to the song and determine tempo and time signature. Write e.g.
[120 BPM]and[4/4]at the top. If it has a loping feel, add[Shuffle]. - Map out the structure with sections:
[INTRO],[VERSE],[CHORUS],[BRIDGE],[OUTRO]. - Lock in the basic groove. Usually one bar with
(4×)or(8×)covers a whole section. - Only write out the bars that differ from the basic groove — fills, breaks, transitions. Everything else stays a repeat.
- Play the original alongside (Apple Music/Spotify) and press Play in Drum Charter to check your transcription against it.
Preparing a set for the gig
- Save all songs of a set in one folder in iCloud Drive — in playing order (e.g. with leading numbers in the filename).
- Open Concert Mode with Cmd+Shift+F (entire folder) — you get a pageable playlist.
- Set font size and bars per line so you can read everything reliably from your playing position.
- Enable the click (with in-ears) and MIDI BPM detection if needed.
Practicing a hard spot
- Mark the critical bar and open Practice Mode (Cmd+Shift+P).
- Set the loop with Loop; for transitions extend it to 2 bars with +.
- Drop the practice tempo significantly. Play the spot 5–10 times error-free.
- Connect your e-drums and watch the cyan hit stripes — aim to land them centered on the notes. Only then raise the tempo.
Troubleshooting
No sound during playback
- iPhone: check the silent switch on the side.
- Check the media volume (not the ringer volume).
- Bluetooth headphones: connected and selected as output?
- Restart the app once — the audio engine initializes on first play.
MIDI e-drums not recognized
- Check the USB or Bluetooth MIDI connection.
- Open Practice or Concert Mode — only there is MIDI actively listened to.
- Make sure MIDI BPM Detection is enabled in that mode.
- Some interfaces need an app restart after connecting.
Validation shows an error
- Open the Validate tool. Every error names its location so you can find it fast.
- Triplets need exactly three notes after the
³marker. - Line lengths: all three lines of a bar must be the same length. Auto-format (Return at the end of a line) helps.
- Repeats: every start marker
|:needs an end marker:|with a repeat count.
Concert Mode shows only 1 column despite [columns: 3]
- Multi-column lyrics only exist in Lyrics Mode, not Drum Mode.
- On iPhone the display is always single column.
- The column count adapts to width: if the window is too narrow or the font too large, Drum Charter automatically reduces to 2 or 1 column so nothing overflows.
Glossary
| Term | Meaning |
|---|---|
| Backbeat | The accented snare hits on beats 2 and 4 — the backbone of rock and pop. |
| BPM | Beats per minute — the tempo, measured in quarter-note beats per minute. |
| Four-on-the-floor | Kick on every quarter (1 2 3 4). Typical of disco and house. |
| Ghost note | A very quiet snare hit that fills the groove without dominating. |
| Flam | Two closely offset strokes played as one thick accent. |
| Offbeat | The „and“ between the quarter beats. |
| The feeling of sitting perfectly in time — neither rushing nor dragging. | |
| Position | One of the 16 (or 12) slots per line. The smallest time unit in the grid. |
| Rehearsal mark | A label in the score (e.g. „Chorus“) — created from your sections on MusicXML export. |
| Shuffle / Swing | A rhythmic feel where the offbeats are pushed later. |
| Stem | Note stem direction separates the voices (hands/feet) in the score. |
Contact & Support
Report a bug
So we can help you quickly, please include:
- Device (e.g. „iPad Pro 13-inch,“ „MacBook Air M2“)
- Operating system version (e.g. „iPadOS 18.1,“ „macOS 15.2“)
- Drum Charter version (Settings → About)
- What exactly happened — and what you expected
- Steps to reproduce the issue
- Optional: screenshot or screen recording